welded wire mesh machine

wire:2.2-2.8mm weight :3.2t welding no. :16 welding speed :50 times/min

Our machine adopts electrical & electronic technique with both separate-phase welding and

welding time is composed of digital and integrated electric circuit. This opeartion is accurate,it has

stable function ,firm welded point and without welded tracks.

Cross wires are needed to be pre-straightened and cut ,then put into the cross wire hopper.Step

motor in the hopper controls fetching the cross wire and feeding the cross wires into welding

automatically ,so it is accurate.The line wire is fed from coil.The edge of mesh is regular and it is

unnecessary to slice the mesh edge.

Mesh pulling system adopts elastic tension link and mesh opening opositioning system,it is easy to

regulate the mesh opening size which is rather accurate,welding aperture could adjust randomly

with range. Not only welding speed is fast but also operating easily.Only two men can finish the

operation.

The finished products can be in coil or in panel.

Machine parameters:

Wire	2.2-2.8mm	Line wire feed	continuous
Weft distance	24mm	Cross wire feed	Pre cut
Line distance	25mm	Rated voltage	380V
Width	2500mm	Rated power	63KVA*2
Welding speed	45times/min	Dimension	1800*2500*1800mm
Welding No.	16	Weight	3.2T

welded wire mesh machine